ABSTRACT
The use of plastics in the world is increasing, but their proper final arrangement is limited. Peru made regulatory efforts to reduce its use;however, they are isolated activities that have not represented a significant change in their management. This study allows to identify the presence of microplastic on one of the busiest beaches of the city of Lima Metropolitana, during the emergency period caused by the SARS-COV-2 pandemic. To achieve the objectives of the research, it has been sampled in high tide and supra-coastal areas, applying the methodology proposed in the Ministry of the Environment's Soil Sampling Guide. This study shows the presence of microplastics, with an abundance of 43 pieces per m2, and found that the predominance of the type of microplastic found is of secondary origin (polystyrene and polypropylene);however, 20.9% correspond to primary microplastics (pellets) whose source could not be determined. Finally, it is indicated that despite restrictions on the state of emergency the number of microplastics per m2 in Agua Dulce Beach between 2019 (40 pieces) and 2020 (43 pieces) increased by 7.5%.
ABSTRACT
The COVID-19 pandemic brought a period of high consumption of protective masks and an increase in their waste. Therefore, it was necessary to look at possibilities for their disposal. This article is focused on the disposal of FFP2 masks in the form of pellets blended with sawdust. Further, their ash melting behavior was observed. The method of ash preparation can impact the resulting values of melting temperatures. Therefore, this article investigates the resulting values of ash melting temperatures determined during different ash preparations, such as temperatures (550 °C and 815 °C) and ash size (non-sifted, smaller than 50 µm and 100 µm). All measured deformation temperatures were higher than 1100 °C and even higher than 1200 °C for some samples. Moreover, the presence of FFP2 masks in pellets only insignificantly affected the values of melting temperatures compared to pure wood pellets. The measured values also showed that increasing the temperature of ash preparation from 550 to 815 °C can increase the resulting values of melting temperature. The most significant proportion of the fraction size on the resulting melting temperatures was observed for beech with 5% and 10% of masks at an ash temperature of 550 °C and for spruce with 10% of masks at an ash temperature of 815 °C. © 2023 by the authors.
ABSTRACT
The ongoing COVID-19 pandemic has disrupted global economic activity in all sectors, including forest industries. Changes in demand for forest products in North America over the course of the pandemic have affected both primary processors and downstream industries reliant on residues, including wood pellet producers. Wood pellets have become an internationally traded good, mostly as a substitute for coal in electricity generation, with a significant proportion of the global supply coming from Canadian producers. To determine the effect of the COVID-19 pandemic on the Canadian wood pellet industry, economic and market data were evaluated, in parallel with a survey of Canadian manufacturers on their experiences during the first three waves of the pandemic (March 2020 to September 2021). Overall, the impact of the pandemic on the Canadian wood pellet industry was relatively small, as prices, exports, and production remained stable. Survey respondents noted some negative impacts, mostly in the first months of the pandemic, but the quick recovery of lumber production helped to reduce the impact on wood pellet producers and ensured a stable feedstock supply. The pandemic did exacerbate certain pre-existing issues, such as access to transportation services and labour availability, which were still a concern for the industry at the end of the third wave in Canada. These results suggest that the Canadian wood pellet industry was resilient to disruptions caused by the pandemic and was able to manage the negative effects it faced. This is likely because of the integrated nature of the forest sector, the industry's reliance on long-term supply contracts, and feedstock flexibility, in addition to producers and end-users both being providers of essential services.
ABSTRACT
The recent upsurge in the studies on micro/nano plastics and antimicrobial resistance genes has proven their deleterious effects on the environmental and human health. Till-date, there is a scarcity of studies on the in-teractions of these two factors and their combined influence. The interaction of microplastics has led to the formation of new plastics namely plastiglomerates, pyroplastics. and anthropoquinas. It has long been ignored that the occurrence of microplastics has become a breeding ground for the emergence of antimicrobial resistance genes. Evidently microplastics are also associated with the occurrence of other pollutants such as polyaromatic hydrocarbons and pesticides. The increased use of antibiotics (after Covid breakout) has further elevated the detrimental effects on human health. Therefore, this study highlights the relation of microplastics with antibiotic resistance generation. The factors such as uncontrolled use of antibiotics and negligent plastic consumption has been evaluated. Furthermore, the future research prospective was provided that can be helpful in correctly identifying the seriousness of the environmental occurrence of these pollutants.
ABSTRACT
Residential biomass combustion has been pointed out as one of the largest sources of atmospheric pollutants. Rising awareness of the environmental effects of residential biomass combustion emissions boosted the development of different emission reduction devices that are currently available on the market for small-scale appliances. However, detailed studies on the efficiency of these devices in different combustion systems available in Southern European countries are lacking. In this study, two pollution control devices (catalytic converter and electrostatic precipitator) were tested in two different combustion systems (batch mode operated woodstove and automatically fed pellet stove) in order to assess the emission reduction potential of the devices. Pine firewood was used to fuel the woodstove. One commercial brand of pellets and an agricultural fuel (olive pit) were taken for the experiments in the pellet stove. While the efficiency of the electrostatic precipitator in reducing PM10 was only recorded for woodstove emissions (29%), the effect of the catalyst in decreasing gaseous emissions was only visible when applied to the pellet stove flue gas. For wood pellet combustion, reductions of CO and TOC emissions were in the range of 60–62% and 74–77%, respectively. For olive pit combustion, a lower decrease of 59–60% and 64% in CO and TOC emissions, respectively, was recorded.
ABSTRACT
In this work, a rapid and simplified method for extracting SARS-CoV-2 RNA from whole wastewater using a magnetic beads-based protocol is presented. The described method involves the centrifugation of a 50-mL aliquot of raw wastewater influent for 5 min to obtain a 500-μL pellet, which is eluted with 2 mL of a Tween®20-based elution buffer;1 mL of the elute is extracted for RNA using a direct magnetic bead-based extraction method. RNA recovery was examined in several bench-scale experiments using heat-inactivated SARS-CoV-2 (HI-SCV-2) spiked into raw wastewater to assess the effects of different solids pellet : buffer ratios, inhibition mitigation strategies, and varying levels of total suspended solids. When the method was assessed using an influent wastewater sample known to contain SARS-CoV-2, the viral signal was detected in all five biological replicates, whereas direct extraction of 1-mL aliquots of the raw wastewater resulted in a 40% viral detection rate. The experimental method limit of detection (MLOD) using HI-SCV-2 spiked into raw wastewater was 50 GU mL−1 with a 95% limit of detection. Using the described protocol, the presence of SARS-CoV-2 RNA was verified in wastewater collected from wastewater treatment facilities (WWTFs) in Atlantic Canada over a period of 15 weeks during the rise and fall of a COVID-19 outbreak. This method is effective and rapid and could provide potential application for laboratories with limited resources. Of approximately 50 methods that have been developed for measuring SARS-CoV-2 in wastewater referenced in the literature, this is the first to advance a robust magnetic beads-based RNA extraction technique from whole wastewater without extensive sample pre-treatment. The novel application of this method in the rapid extraction of SARS-CoV-2 RNA from municipal wastewater is an indispensable tool to potentially understand COVID-19 infection occurrence within communities.